机械专业英语翻译The toolholders studied so far are allintended forus
来源:学生作业帮 编辑:作业帮 分类:综合作业 时间:2024/07/18 21:58:18
机械专业英语翻译
The toolholders studied so far are allintended for
use on the carriage of a lathe. Toolholdingis also
done on the tailstock.Figure I-62 shows howthe tail-
stock spindle is used to hold Morse tapershank
tools. One of the most common toolholdingdevices
used on a tailstock is the drill chuck(Figure I一63).A
drill chuck is used for holding straightshank drilling
tools. When a series of operations must beper-
formed and repeated on several workpieces,a tail-
stock turret (Figure I-64) can be used. Theillustrated
tailstock turret has six tool positions,one of which is
a serves used as a workstop. The otherpositions are for cen-
ter
求翻译
The toolholders studied so far are allintended for
use on the carriage of a lathe. Toolholdingis also
done on the tailstock.Figure I-62 shows howthe tail-
stock spindle is used to hold Morse tapershank
tools. One of the most common toolholdingdevices
used on a tailstock is the drill chuck(Figure I一63).A
drill chuck is used for holding straightshank drilling
tools. When a series of operations must beper-
formed and repeated on several workpieces,a tail-
stock turret (Figure I-64) can be used. Theillustrated
tailstock turret has six tool positions,one of which is
a serves used as a workstop. The otherpositions are for cen-
ter
求翻译
The toolholders studied so far are all intended for use on the carriage of a lathe.
刀夹的研究方向都集中于车床的刀架上。
Toolholding is also done on the tailstock.
但刀具也可装夹与尾座。
Figure I-62 shows how the tailstock spindle is used to hold Morse taper shanktools.
图I-62展示尾座如何装夹莫氏锥度刀具。
One of the most common toolholding devices used on a tailstock is the drill chuck(Figure Iһ63).
钻头夹盘是尾座上应用最广泛的刀具夹具之一(图I-63)。
A drill chuck is used for holding straight shank drilling tools.
钻头夹盘用于装夹直柄钻头。
When a series of operations must be performed and repeated on several workpieces,a tailstock turret (Figure I-64) can be used.
当需要对多个零件进行多工位加时可应用尾座转塔(图I-64)。
The illustrated tailstock turret has six tool positions,one of which is a serves used as a work stop. The other positions are for
center
尾座转塔有六个刀位,其中一个为空白刀位,另外的刀位用于中心...
刀夹的研究方向都集中于车床的刀架上。
Toolholding is also done on the tailstock.
但刀具也可装夹与尾座。
Figure I-62 shows how the tailstock spindle is used to hold Morse taper shanktools.
图I-62展示尾座如何装夹莫氏锥度刀具。
One of the most common toolholding devices used on a tailstock is the drill chuck(Figure Iһ63).
钻头夹盘是尾座上应用最广泛的刀具夹具之一(图I-63)。
A drill chuck is used for holding straight shank drilling tools.
钻头夹盘用于装夹直柄钻头。
When a series of operations must be performed and repeated on several workpieces,a tailstock turret (Figure I-64) can be used.
当需要对多个零件进行多工位加时可应用尾座转塔(图I-64)。
The illustrated tailstock turret has six tool positions,one of which is a serves used as a work stop. The other positions are for
center
尾座转塔有六个刀位,其中一个为空白刀位,另外的刀位用于中心...
求机械专业英语翻译Gear type are determined largely by the disposition
英语翻译The only details made public so far are that the group i
求机械专业英语翻译~急~
机械专业英语翻译,求救啊
歌词里有一句 SO FAR WE ARE SO FAR
You are the love of my life.We have been so close,yet so far
YOU ARE SO FAR,WHERE YOU ARE?
The happyness is so FAR
the couple's problems are so far advanced the relationship i
how,English,have,long,you,so,studied,far连词成句
机械英语翻译:The springs are Century die compression springs
翻译 you are always so far