英语翻译2.1有源伺服反馈的基本原理及结构利用有源伺服反馈技术拓展拾振器低频特性的基本原理是利用有源伺服反馈技术增加摆系
来源:学生作业帮 编辑:作业帮 分类:英语作业 时间:2024/10/06 08:17:35
英语翻译
2.1有源伺服反馈的基本原理及结构
利用有源伺服反馈技术拓展拾振器低频特性的基本原理是利用有源伺服反馈技术增加摆系统的质量,从而达到降低系统自振频率的目的.传感器原理如图2所示,X为被测物体相对于惯性参考系(地球)的位移,称之为绝对位移;x为摆体相对于被测物体的位移,称之为相对位移;k为弹簧刚度;b为系统阻尼系数;m为摆体质量;G1为主线圈机电耦合常数;G2为反馈线圈机电耦合常数;i为流入反馈线圈的电流;R为负载电阻;K为放大倍数;KD(1+TDs)为比例微分环节.
2.1有源伺服反馈的基本原理及结构
利用有源伺服反馈技术拓展拾振器低频特性的基本原理是利用有源伺服反馈技术增加摆系统的质量,从而达到降低系统自振频率的目的.传感器原理如图2所示,X为被测物体相对于惯性参考系(地球)的位移,称之为绝对位移;x为摆体相对于被测物体的位移,称之为相对位移;k为弹簧刚度;b为系统阻尼系数;m为摆体质量;G1为主线圈机电耦合常数;G2为反馈线圈机电耦合常数;i为流入反馈线圈的电流;R为负载电阻;K为放大倍数;KD(1+TDs)为比例微分环节.
The basic principles and structure of the 2.1 active servo feedback
Active servo feedback technology to expand the low-frequency characteristics of the pick-up device,the basic principle is to use active servo feedback technology to increase the quality of the pendulum system,to achieve the purpose of reducing system natural frequency.Sensor principle shown in Figure 2,X is the measured object relative to the displacement of the inertial reference system (Earth),called the absolute displacement; x is the pendulum relative to the displacement of the measured object,called the relative displacement; k spring stiffness; b for the system damping; m is the quality of the pendulum; G1,the main coil electromechanical coupling constant; G2 electromechanical coupling constant of the feedback coil; i is the current into the feedback loop; R is the load resistance; K magnification; the KD (1 + TDs,) for the proportion of differential link.
Active servo feedback technology to expand the low-frequency characteristics of the pick-up device,the basic principle is to use active servo feedback technology to increase the quality of the pendulum system,to achieve the purpose of reducing system natural frequency.Sensor principle shown in Figure 2,X is the measured object relative to the displacement of the inertial reference system (Earth),called the absolute displacement; x is the pendulum relative to the displacement of the measured object,called the relative displacement; k spring stiffness; b for the system damping; m is the quality of the pendulum; G1,the main coil electromechanical coupling constant; G2 electromechanical coupling constant of the feedback coil; i is the current into the feedback loop; R is the load resistance; K magnification; the KD (1 + TDs,) for the proportion of differential link.
有源滤波器 分析请问下面有源滤波器 属于几阶的?图中反馈部分 作用是什么? 如果不考虑增益,直接用一个电阻反馈可不可以达
电反馈伺服比例阀用于AGC液压位置控制系统中,电反馈小闭环还起作用吗?AGC液压位置控制系统是典型的闭环控制系统,伺服比
用变频器控制伺服电机,如何读取伺服电机编码器反馈信号到plc
英语翻译近年来,随着伺服电动机技术、电力电子技术和计算机控制技术的发展,使得伺服控制系统朝着控制电路数字化和功率器件的模
伺服阀的用途?
伺服驱动器的作用
PCR技术的基本原理?
阐述生物质能利用技术的基本原理,为什么说生物质能是可再生能源?
rfid有源电子标签的优缺点
谁知道伺服电机具有较硬的机械特性是什么意思?
直流伺服电机与交流伺服电机的优缺点
压力伺服阀的作用?