英语翻译这个对我很重要,请不要好心办坏事!一下是要翻译的:技术要求1各零件清洗干净,无毛刺后装配 2装配后保证极限位置时
来源:学生作业帮 编辑:作业帮 分类:英语作业 时间:2024/10/03 03:21:34
英语翻译
这个对我很重要,请不要好心办坏事!一下是要翻译的:
技术要求
1各零件清洗干净,无毛刺后装配
2装配后保证极限位置时的尺寸272.5
3D=40,d=30,S=100,工作P=20MPA
4试压25MPA,保持5分钟不得有泄漏
5油缸按 JB/T10205-2000标准试验
6油口端面除外的所有外表面喷
H06-2铁红色防锈底漆,RAL1023黄色面漆
7试验合格后油口加保护堵头
8试验介质:46号抗磨液压油
这个对我很重要,请不要好心办坏事!一下是要翻译的:
技术要求
1各零件清洗干净,无毛刺后装配
2装配后保证极限位置时的尺寸272.5
3D=40,d=30,S=100,工作P=20MPA
4试压25MPA,保持5分钟不得有泄漏
5油缸按 JB/T10205-2000标准试验
6油口端面除外的所有外表面喷
H06-2铁红色防锈底漆,RAL1023黄色面漆
7试验合格后油口加保护堵头
8试验介质:46号抗磨液压油
1. All parts should be cleaned and burr-free before assembly.
2. After assembly, make sure the max size is 272.5 to its limit position.
3. D=40, d=30, S=100, Working Pressure=200MPA
4. Test with 25MPA, there should be no leak within 5 mins.
5. Fuel tanks should be tested according to standard of JB/T10205-2000.
6. Except for the end face of fluid port, the undercoat should be H06-2 rustproof iron-red, while the topcoat RAL1023 yellow.
7. Protetive plug should be added to the end face of fluid port after test passed.
8. Test medium: No.46 anti-wear hydraulic oil.
2. After assembly, make sure the max size is 272.5 to its limit position.
3. D=40, d=30, S=100, Working Pressure=200MPA
4. Test with 25MPA, there should be no leak within 5 mins.
5. Fuel tanks should be tested according to standard of JB/T10205-2000.
6. Except for the end face of fluid port, the undercoat should be H06-2 rustproof iron-red, while the topcoat RAL1023 yellow.
7. Protetive plug should be added to the end face of fluid port after test passed.
8. Test medium: No.46 anti-wear hydraulic oil.
英语翻译这个对我很重要,请不要好心办坏事!一下是要翻译的:技术要求1各零件清洗干净,无毛刺后装配 2装配后保证极限位置时
proe4.0装配旋转怎么让他留在旋转好后的位置 装配好的零件是可以围绕着主件旋转的,我就想要他旋转个角
solidworks中,从一个装配体A中另存其中一个零件B,另外打开零件B更改它后,装配体中的这个零件会变吗?
英语翻译要专用术语哦,呵呵...1、装配作业指导书2、工序名称3、工序编号4、工序工时5、装配用具6、装配零部件7、装配
好心办坏事的事例
catia 装配整理一个产品装配是由N个子装配和N个单独的部件装配在一起,我现在按照总装工艺顺序对装配图进行整理,想把子
CATIA装配时倒入零件后,零件自动连在一起不能分开了,移动一个其他的零件也一起移动了
某车间原计划每周装配36台机床,预计若干周完成任务,在装配1/3后,改进操作技术,功效提高一倍,结果...
实在是做不来,1:某车间要装配60台机器,在装配好12台后,改进了操作方法,每天多装配2台,一共用8天完成了任务,求改进
求Proe做好的模型,我要的是三个单独的零件装配到一起的那种!
CAD装配图中零件既出现在1级零件中又出现在2级装配中做子零件的情况下如何标记数量?
solidworks 装配体如何能修改装配零件的名称