英语翻译原因是托架在建模时采取分块建模、共节点连接的方法,应力集中较大,而不能满足抗冲击要求.建议托架采取铸造方式生产,
来源:学生作业帮 编辑:作业帮 分类:英语作业 时间:2024/10/05 03:45:08
英语翻译
原因是托架在建模时采取分块建模、共节点连接的方法,应力集中较大,而不能满足抗冲击要求.建议托架采取铸造方式生产,加大托架上法兰宽度,增加肋板、圆角,减少应力集中,使得托架左右受力部位连接成为一个整体.隔振器受力情况满足国军标要求,但其变形因无参考标准而无法校核.
原因是托架在建模时采取分块建模、共节点连接的方法,应力集中较大,而不能满足抗冲击要求.建议托架采取铸造方式生产,加大托架上法兰宽度,增加肋板、圆角,减少应力集中,使得托架左右受力部位连接成为一个整体.隔振器受力情况满足国军标要求,但其变形因无参考标准而无法校核.
(请勿对比机译结果,回答记录和采纳率就是证明)
Partitional modeling and conode-connecting method was applied during modeling process and as a result, the stress of the bracket was over concentrated and failed to meet the requirements of impact resistance. So it suggests that the bracket should be produced through casting method and widen the flange on the bracket as well as increase the rib and fillet for reducing stress concentration around the bracket thus to connect the load-carrying parts on both sides of the bracket into a whole body. The load-carrying condition of vibration isolator has met the requirements of national military standard, while it is not possible to check and test its deformation performance for the lack of reference standard.
(欢迎交流指正)
再问: 请问你有联系方式吗?
Partitional modeling and conode-connecting method was applied during modeling process and as a result, the stress of the bracket was over concentrated and failed to meet the requirements of impact resistance. So it suggests that the bracket should be produced through casting method and widen the flange on the bracket as well as increase the rib and fillet for reducing stress concentration around the bracket thus to connect the load-carrying parts on both sides of the bracket into a whole body. The load-carrying condition of vibration isolator has met the requirements of national military standard, while it is not possible to check and test its deformation performance for the lack of reference standard.
(欢迎交流指正)
再问: 请问你有联系方式吗?
英语翻译原因是托架在建模时采取分块建模、共节点连接的方法,应力集中较大,而不能满足抗冲击要求.建议托架采取铸造方式生产,
2010版的 pkpm坡屋顶怎么建模?是上节点抬高还是直接平面建模?是不是版本不一样建模方式也不一样?
在课堂教学时,进行提问应采取的方式方法有哪些
詹天佑在开凿隧道时采取了哪两种凿井的方法?原因是什么?
数学建模的基本方法?
ANSYS节点应力和单元应力不同的原因?
英语翻译现如今许多的父母为了更好的教室他们的孩儿而采取了不同的教育方式 采取何种方式教育孩子是当那个能起正面作用的,就用
请问数学建模对那一方面的能力要求较高?高数,概率or其他.我现在大二,想参加数学建模,全国数学建模大赛是在什每年么时候举
我在abaqus中设定某金属部件的材料极限强度是1430.最后加载建模分析后,提取该部件的应力也是1430!
制取碳酸饮料时为增大二氧化碳在水中的溶解度可采取的方法是
1998年中国政府为避免亚洲金融危机的冲击而采取什么样的措施?
油枪是不能直接往塑料油壶中加油的,对此,加油站常采取的方法是