ansys 中计算温度时的sf命令
来源:学生作业帮 编辑:作业帮 分类:英语作业 时间:2024/07/16 13:07:41
ansys 中计算温度时的sf命令
命令如下:
lsel,s,1,4,1
lsel,a,13,16,1
nsll,s,1
SF,all,RDSF,0.85,-1,
问:SF命令后0.85sgi代表的什么?后面的-1代表什么?
命令如下:
lsel,s,1,4,1
lsel,a,13,16,1
nsll,s,1
SF,all,RDSF,0.85,-1,
问:SF命令后0.85sgi代表的什么?后面的-1代表什么?
RDSF (surface-to-surface radiation).面到面的辐射
If Lab = RDSF,VALUE is the emissivity value;0.85是辐射率,the following conditions apply:If VALUE is between 0 and 1,apply a single value to the surface.
If Lab = RDSF,VALUE2 is the enclosure number.Radiation will occur between surfaces flagged with the same enclosure numbers.If the enclosure is open,radiation will also occur to ambient.If VALUE2 is negative radiation direction is reversed and will occur inside the element for the flagged radiation surfaces.Negative value of enclosure number is applicable for FLUID141 and FLUID142 elements,to model radiation occurring between surfaces inside the fluid domain.-1代表向单元内部辐射
If Lab = RDSF,VALUE is the emissivity value;0.85是辐射率,the following conditions apply:If VALUE is between 0 and 1,apply a single value to the surface.
If Lab = RDSF,VALUE2 is the enclosure number.Radiation will occur between surfaces flagged with the same enclosure numbers.If the enclosure is open,radiation will also occur to ambient.If VALUE2 is negative radiation direction is reversed and will occur inside the element for the flagged radiation surfaces.Negative value of enclosure number is applicable for FLUID141 and FLUID142 elements,to model radiation occurring between surfaces inside the fluid domain.-1代表向单元内部辐射
ansys 中计算温度时的sf命令
ansys 中该命令流SF,ALL,PRES,0 是什么意思啊?
在ansys的热对流加载指令SF中:SF,Nlist,Lab,VALUE,VALUE2 其中Value2是指bulk t
怎么提取ansys中生成的命令流
ANSYS命令流中/GOPR是什么意思
ansys疲劳分析分析时,在最后一步输入命令后,无法计算
vfp中计算总分的命令
ansys中命令流中 ET,1,plane13,7,1 中的7和1的含义
ansys中如何用CYLIND命令 建沿y方向的圆柱体
Ansys,热分析得出的节点温度,耦合到结构计算中提示节点位移过大,这个是怎么回事?
在ANSYS中如何设置随温度变化的内聚力
ansys中怎样查看某一点的温度时间曲线